How Much Does It Cost to Install Patio Pavers in 2022?

The question on every homeowner’s mind is how much would installing pavers cost? Pavers can range from about $10 to $25 per square foot. However, the prices are also largely determined by your location, like the paver installation in Largo, Florida has a different cost than anywhere else in the country.

We are here to put together a comprehensive price guide to help you prepare your finances better before installing pavers. Our guide will be based on an assumption that your property requires 400 square foot (20 feet by 20 feet). The estimates are based on average costs and your price quote may vary.

The cost of installing pavers can be divided into 5 (five) major components.

• Cost of Materials
• Operating Costs
• Labor Costs
• Company Overhead
• Profit Margin of the Company

As a general rule, the minimum cost of installing pavers should not be lower than $16.5 because at prices lower than this, there will probably be a compromise in quality.

Cost of Materials

The cost of materials can be further divided into 6 (six) parts, namely

• Pavers

The pavers on offer can come in a wide variety, ranging from concrete pavers, which are affordable, to stone pavers, which cost more. Depending on your design choices and requirements, you can select a paver made from a different material, a distinct texture, and a unique blend of color and style.

• Usually, a concrete paver can cost between $3 to $6 per block.
• Brick pavers come in two types: the lower end variants cost between $4 to $8 per square foot, while the higher end variants can cost up to $15 to $20 per square foot.
• Stone pavers are made of natural stone or made to imitate natural stone. They can range from $7 to $16.

However, you need to account for wasted paver stones which can be up to as high as 10%.

Making necessary adjustments, the approximate cost of pavers for 400 sq ft would be around $1,534.89.

• Class II Road Base

This base is made from crushed rocks which can range from fine dust to ¾” stones. These rocks are used as a bottom base before starting the paver installation. The cost of a Class II Road base varies significantly depending on your location; however, it can get as low as $0.73 per square foot.

For 400 sq ft. the total cost would be $292.

• Geotextile Fabric

The class II road base should not be mixed with your native soil. In order to prevent this, a layer of geotextile fabric is installed under it. It can cost about $0.43 per square foot.

For 400 sq ft, the total cost would be $172.

• Bedding Sand

Bedding sand serves the purpose of being a cushion between the class II road base and the paver blocks or stones. This will cost about $0.36 per square foot.

For 400 sq ft, the total cost would be $144.

• Concrete

The building material that you will require in a large amount while installing pavers is concrete. It is used in several ways for installing pavers, but it is mostly used to reinforce the borders. Concrete costs roughly $1.33 per square foot.

For 400 sq ft, the total cost will be $107.

• Joint Sand

Joint sand is used to fill the joints between pavers and it helps keep the pavers level and in place. It costs about $0.12 per square foot.

For 400 sq ft, the total cost will be about $4.80

This brings the total cost of materials for a 400 sq ft paver installation in Largo, FL up to $2,255.30.

Operating Costs

Operating costs comprises several smaller fees, such as.

• Dump Costs

In order to construct a 400 sq ft paver installation, roughly two and a half trucks of concrete and half a truckload of dirt is required. These make up the dump costs. One dirt load costs approximately $160, while one load of concrete costs about $121.

The total dump costs amount to an average of $261.50.

• Fueling Costs

Fueling costs can be hard to gauge, as it differs in every case and every location. It also highly depends on the fuel prices and the distance that the materials need to be hauled. Therefore, an educated guess for fueling costs would be about $500.

• Delivery Costs

Depending on the manufacturer and distance, the prices of delivery can vary from $520 to $670 per trip. Since 400 sq ft of pavers need to be delivered and one load can haul 1,400 sq ft, the cost of one haul can be estimated at $550.

• Porta Potty

Since 400 sq ft is a large area to cover, it can take a considerable amount of time and workforce to complete paver installation. In the meantime, the workers will require a portable bathroom. This will set you back another $200.

• Pallet Fees

Pallets usually cost about $0.09 per square feet. Hence, for a 400 sq ft project, a total can be estimated at around $36.

• Clean-Up Costs

The leftover material after construction has been completed needs to be picked up. This fee is termed as clean-up costs and can vary depending on the service provider and the distance of hauling. An educated guess would be $225.

• Excavation

The cost for excavation can range from $0.47 to $2.28 per square foot. However, we can assume an average $1 per sq ft rate. The total for a 400 sq ft area would cost $400.

This brings up the total operation costs up to $2,202.50.

Labor Costs

The biggest factor that influences the price of a paver installation is the cost of labor. While choosing a paver installer, it is not recommended to pick the cheapest alternative. Instead, you should always pick one with the most experience.

An experienced paver installation company can charge between $5.53 to $8 per square foot for labor.

Depending on the quality of the installation crew, your labor charges for a 400 sq ft area can range from $3,200 to $2,140. However, we will assume an average price of $6.01 per square foot, which brings the total up to $2,404.

Company Overhead

Contractors usually have a lot of overhead costs that may be included in your ultimate price for the paver installation. Though the overhead depends highly on the project, we can assume a 10% overhead.

Considering the cost laid out so far, the overhead will be 10% of $6,861.90, which brings the company overhead charges up to $686.18.

Company Profit

Depending on the service provider, a paver installation company can have different profit margins, starting from 10% all the way up to 40%.

If we assume a profit margin of 10%, the total company profit amounts to $754.80.

The Total Cost

Following the market trends in 2022, an average paver installation in Largo, FL, can cost about $8,302.80 for a 400 sq ft area. Get free estimation for the Paver largo florida. 

Recommended Read:

• All You Need To Know About Pool Deck Resurfacing, Repair & Installation In Clearwater, Fl
• Tips For Choosing The Right Paver Installation Contractor
• The Joy, Comfort, And Stress-Reducing Power Of Pool Paver Installation
• 7 Things You Must Know About Pool Paver Installation

Find more designs & creatives for the paver patio installation.